A bath liner is a new surface without a new tub. A sheet of acrylic is heated and molded to the exact shape of your existing tub or shower base, and the finished shell, usually with matching wall panels, is fitted and sealed directly over the unit you already have. We are Hayes Bath Co., and we install liners in Delaware County when they are the right answer. We also talk homeowners out of them, on a regular basis, when they are not. This page is the honest version of that conversation: what a liner does well, where it fails, and how to tell which side of the line your bathroom is on.
A bath liner in Delaware, OH is a custom-measured acrylic shell fitted over a sound tub or shower base, typically $4,500โ$8,500. It is the fastest route we offer to a fresh bath, and we will tell you honestly if your tub is a liner candidate. Call (740) 444-8949 for a free consultation.
A liner is a cosmetic and surface repair, not a structural one. Everything under the shell stays exactly as it is. That single fact decides whether a liner is a smart buy or a waste of money, and it is why our liner consultations spend more time inspecting your existing tub than selling you a new surface.

There is no such thing as a universal liner. Yours is made for your tub. At the first visit we identify the model of your existing unit and take detailed measurements and photos. The manufacturer thermoforms a sheet of acrylic over a mold of that exact tub, so the shell follows its curves, ledges, and drain position. Matching wall panels are measured for your alcove at the same visit.
The install itself usually takes a day. The old fixtures come off, the existing surface is cleaned and prepared, and the liner is set in adhesive and sealed at every edge. A new drain, overflow, and trim finish the unit, and the wall panels go up over the prepared surround. Because nothing is demolished, there is no dumpster, no subfloor exposure, and no plumbing relocation. The bathroom is usable the next day, after the sealant cures.
The catch is in the word fitted. A liner made from an exact model match, installed over a sound unit, feels solid underfoot and looks like a new tub. A liner stretched over a near-match, or laid over a base that is already soft, feels hollow and fails early. The measurement visit is not a formality. It is the whole product.
Most liners we quote land in the $4,500โ$8,500 range, covering the tub or shower base liner, wall panels, and new drain and trim. The same wet area fully replaced generally runs higher (our replacement work is priced like the projects on our one-day bath remodel page), because demolition, disposal, and a new unit are real work. The liner's savings are real too, as long as the tub underneath deserved saving.
Your exact price comes from the consultation, in writing, after we have inspected the existing unit and confirmed it is a liner candidate. If it is not, we will say so and quote the replacement instead, and the bathroom remodeling cost guide shows how the numbers compare across project types.
Acrylic care is simple: warm water, a soft cloth, and a non-abrasive cleaner. Skip scouring powders and stiff brushes, which dull the finish, and avoid leaving bath mats with suction cups stuck down full-time, which can pull at the surface over years. Delaware County hard water spots wipe off the non-porous surface rather than soaking in.
A correctly fitted liner over a sound tub gives years of daily service. What shortens its life is almost always underneath it: a base that flexed, adhesive that let go at an edge, or water that found a seam. That is why the inspection matters more than the installation, and why we would rather lose a liner sale than install one over a tub we do not trust.
A liner decision is an inspection decision. Call (740) 444-8949, and we will come out, identify your tub, check its structure and plumbing, and tell you honestly whether it earns a liner or needs replacing, with written prices for the right project either way.
Most liners we quote land in the $4,500โ$8,500 range, including the liner, wall panels, and new drain and trim. The exact figure comes from the consultation as a written flat quote, after we confirm your existing unit is sound enough to deserve one.
The measurement visit takes under an hour. The liner is then fabricated to your tub, and the installation itself usually takes one day. The bathroom is back in service the next day, once the sealant has cured.
A properly matched and fitted liner should not. It sits in full contact with the tub beneath it. Hollowness and flex are the marks of a poor model match or a base that was already failing, both of which the inspection is designed to catch before anyone orders anything.
No, and be wary of anyone who says otherwise. A liner covers the surface of the tub. If the leak is in the valve, the drain assembly, or the plumbing in the wall, it needs repair or replacement, not a cover. If the problem is a crack in the finish of a tub whose structure and plumbing are otherwise sound, we will talk through whether a liner or a replacement is the honest fix.
Ask one question: is the tub itself, its structure, its plumbing, its floor, sound? If yes and the problem is the surface, a liner is the efficient answer. If any part of that answer is no, replacement costs more now and less over the life of the bathroom. We will give you our read, with both prices, at the consultation.

Tell us what you want changed and we will call back from (740) 444-8949 to set a time. The consultation is in your home, we bring finish samples, and you get a written flat quote. No pressure, no obligation.